Roadmarking Pushing Machine
PPR-PX7
Two component road marking machine is an advanced marking method
that is cost effective and saves a lot of time with water base paint and
cold plastic paint.
Two components marking paint consists of two hydraulic plunger
pumps, two guns and two heads. The machine also has its own glass
bead tank with air dispensing glass bead head.
When the PPR-PX7 is used for water base or solvent base road marking
paint it is most advantageous because of the two separate functioning
plunger pumps and two heads makes the worlds difference because it
allows you to work simultaneously with two different paint colours
each connected to its own head. This is also made possible by the
machine being equipped with two holders for 20 litre paint cans. Each
20 litre paint holder is also equipped with its own suction hose and
release hose.
 
When the PPR-PX7 is used for cold plastic it is most advantageous because of two components marking paint, consisting of cold plastic paint and curing agent. The two liquids are contained in separate tanks until they are sprayed and confluence in the air during marking operation. After cold plastic paint and curing agent are mixed in the air, they immediately form the marking lines on the road because the curing agent helps speed up the solidification of paint.
The marking width can be controlled by adjusting the angle of sprayers.